Siemens Building Automation NYC
Siemens building management systems run a meaningful share of NYC commercial real estate. We install, support, and integrate Siemens BMS for offices, mixed-use buildings, and multifamily portfolios where the HVAC, lighting, and ventilation controls all need to talk to each other. We also handle migration work from APOGEE to Desigo CC for buildings whose controls have aged out.
What we install
Siemens Desigo CC supervisory control. APOGEE field-level and building-level controllers, including continued support and migration. BACnet IP and BACnet MS/TP networks. PXC controllers and TX-I/O modules. Lighting and shading controls integration. Tenant-billing submetering setups. Energy-management dashboards. Integration with security and access platforms when the building wants a unified property view.
Where we install
Commercial offices in Midtown, Hudson Yards, and the Financial District. Mixed-use towers across Manhattan and Brooklyn. Multifamily portfolios with central HVAC plant. Educational and institutional sites. Hotels and hospitality facilities.
FAQ
Desigo CC vs APOGEE Insight: when do I migrate?
APOGEE Insight has been the workhorse for years but is being phased toward Desigo CC. If your controls hardware is past mid-life or if you need modern web-based supervisory access, Desigo CC is the migration path. We do this migration regularly.
Can you take over support of an existing Siemens BMS?
Yes. We start with a controls audit, BACnet network walk, and panel inspection. From there we’ll provide a support proposal scoped to your building.
Does Siemens BMS integrate with my access-control or VMS?
Yes. BACnet-to-Niagara gateways and direct integration with major VMS and access platforms are configurations we deploy regularly.
Can you submeter tenants for cost recovery?
Yes. Tenant submetering and billing reports are a common scope for our commercial real estate clients.
Do you handle Local Law 87 energy audits?
Yes. We provide the controls-side data and configuration support that LL87 retrocommissioning requires.
Are you pursuing Siemens Solution Partner status?
Yes. We are working through Siemens’ partner program for direct technical and parts support.
Project case story
A Midtown commercial tower replaced an aging APOGEE supervisory layer with Desigo CC, retaining the field-level APOGEE controllers and migrating the operator workstations and reporting layer. Migration ran 14 weeks across two phases. Property manager now monitors the full BMS, lighting, and tenant submetering from a single web interface.